EPSG Dataset :: v12.003

Change of Vertical Unit

Coordinate Operation Method Details [VALID]

Name:

Change of Vertical Unit

Code:

1104

Operation is Reversible:

Yes

Formula:

Note: These formulas have been transcribed from EPSG Guidance Note #7-2. Users are encouraged to use that document rather than the text which follows as reference because limitations in the transcription will be avoided.

If there is a requirement to change the linear unit of a vertical axis, the following formulae can be used:

for the forward transformation: X2 = (X1 * U1) / U2
for the reverse transformation: X1 = (X2 * U2) / U1

where U1 and U2 are unit conversion ratios for CRS1 and CRS2 respectively. U = [(factor b) / (factor c)] from the EPSG Dataset Unit of Measure table, populated with respect to the SI base unit, for linear units the metre.

Then
for the forward transformation:
X2 = (X1 * (b1 / c1)) / (b2 / c2) = (X1 * b1 * c2) / (b2 * c1)
for the reverse transformation:
X1 = [X2 * (b2 / c2)]/ (b1 / c1) = (X2 * b2 * c1) / (b1 * c2)

Example:

Conversion of a height of 25 metres into US survey feet:

For the metre (EPSG UoM code 9001) factor b = 1 and factor c = 1, so U1 has a value of 1.

For the US survey foot (EPSG UoM code 9003) factor b = 12 and factor c = 39.37, so U2 has a value of approximately 0.304800609601219 (one US survey foot ≈ 0.304800609601219 metres).

Then H(ftUS) = (25 * (1 / 1)) / (12 / 39.37) = 82.02 ftUS.

For the reverse conversion of 82.02 ftUS into metres:
U1 and U2 are as for the forward case, with values of 1/1 and 12/39.37 respectively.

Then Hm = (82.02 * (12 / 39.37) / (1 / 1)) = 25.00 m.

Method
Parameters:

Parameter Name	Parameter Code	Sign reversal	Parameter Description

Meta Data

Information Source:

EPSG Guidance Note #7-2.

Data Source:

EPSG

Revision Date:

April 20, 2021

Change ID:

[2021.007]

Wildcard	Example
% or *	Any wildcard characters
? or _	One wildcard character
[ - ]	[ - ] Range e.g. N[a-c] will return all geodetic objects that contains a string starting with the letter 'N' or 'n' followed by any of the letters contained within the range specified within the square bracket, e.g. letters a, b and c.
\|	Or e.g. E[a\|e]M will return all geodetic objects that contains a string starting with the letter E(e), ends with the letter M(m) and also contain either the letter a or letter e.